1. What should I do if I see an error code not listed here?
Error Codes List for KuKirin Electric Scooter
In This Article:
Error Codes-KuKirinG2 Master/KuKirinG3 Pro/ KuKirinG4 Max
Error Codes-KuKirin G2 Pro/ KuKirin G2 Max
Error Codes- KuKirin G2/KuKirin G3/KuKirin G4
Error Codes- KuKirin G2 Ultra
| Error Code | Issue Description | Troubleshooting & Solution |
|---|---|---|
| E-000 | Motor Stall / Locked Rotor | Check for mechanical blockages (e.g., seized disc brakes, debris). Clean and clear any obstructions. |
| E-001 | Battery Overvoltage | Measure battery voltage. If the voltage is abnormal (too high), the battery pack is faulty. |
| E-002 | Battery Undervoltage | Fully charge the battery first to see if the E-002 error code disappears. |
| E-003 | Controller Failure | Internal controller malfunction. Replace the controller unit. |
| E-004 | Accelerator/Throttle Error | Faulty thumb throttle. Replace the accelerator/throttle assembly. |
| E-005 | Brake Lever Error | Brake sensor or lever malfunction. Replace the brake lever/handle. |
| E-006 | Communication Failure | Likely a fault in the main harness. Unplug and reconnect cables; replace if needed. |
| E-007 | Rear Motor Hall Error | Faulty Hall sensor in the rear motor. Replace the rear motor. |
| E-008 | Front Motor Hall Error | Faulty Hall sensor in the front motor. Replace the front motor. |
| E-009 | Battery Comm. Failure | Inspect the comm. cable for loose screws or damage. Re-tighten or replace. |
Error Codes- KuKirin M4 Max
| Error Code | Issue Description | Troubleshooting & Solution |
|---|---|---|
| E-01 | Motor Failure | Reconnect the motor cable. If the error persists, replace the motor to resolve the issue. |
| E-02 | Throttle Failure | Reconnect the display port. If the error persists, replace the display unit for further testing. |
| E-03 | Controller Failure | Internal controller malfunction. Replace the controller unit. |
| E-05 | Battery Undervoltage | Fully charge the battery. If the error remains, the battery may be damaged and needs replacement. |
| E-06 | Comm. Failure (Display) | Replace the controller first. If error persists, replace the display unit. |
| E-07 | Comm. Failure (Controller) | Replace the display first. If error persists, replace the controller unit. |
| E-09 | Motor Overheating | Power off and let it cool down. If the error remains after cooling, replace the controller. |
Error Codes- KuKirin A1
| Error Code | Issue Description | Troubleshooting & Solution |
|---|---|---|
| E-001 | Rear Motor Failure | Test by replacing the motor. If the error persists, replace the controller for further testing. |
| E-002 | Accelerator/Throttle Error | Replace the thumb throttle assembly. |
| E-003 | Controller Failure | Internal controller malfunction. Replace the controller unit. |
| E-004 | Brake Failure | Faulty brake sensor or lever. Replace the brake lever. |
| E-005 | Battery Undervoltage | Insufficient battery power. Please recharge and try again. |
| E-006 | Display Receiving Error | First replace the controller. If the error persists, replace the display unit. |
| E-007 | Display Sending Error | First replace the display unit. If the error persists, replace the controller. |
| E-008 | Motor Overheating | Let it rest. If the error does not disappear after cooling, replace the motor. |
| E-009 | Controller Overheating | Protection mode activated. The error will disappear once the controller cools down. |
Error Codes- KuKirin S1 Max
| Error Code | Issue Description | Troubleshooting & Solution |
|---|---|---|
| 1E | Motor Hall Sensor Error | Faulty Hall sensor within the motor. Replace the motor assembly. |
| 2E | Throttle Failure | Accelerator malfunction. Replace the thumb throttle unit. |
| 3E | Controller Failure | Internal controller malfunction. Replace the controller unit. |
| 4E | Brake Failure | Faulty brake sensor or lever. Replace the brake thumb throttle/lever. |
| 5E | Undervoltage Protection | Low battery. If the error persists after a full charge, replace the battery for testing. |
| 6E | Display Receiving Error | The display cannot receive signals. Replace the display unit. |
| 7E | Display Sending Error | The display cannot send signals. Replace the display unit. |
| 9E | Controller Overheating | High temperature detected in the controller. Replace the controller unit. |





